Hi. My name is Anna and I have an addiction. I am addicted to scarves.
Last fall, the phenomenon of the “blanket scarf” occurred. The American Eagle blanket scarves were selling for upwards of $30. From my research, $20 seems to be about the average cost of a blanket scarf. Funny enough, you can make one yourself, for less than $10 if you use your coupons right.
What you’ll need:
1 1/2- 2 yards flannel (preferably plaid) fabric
Go to a fabric store, like JoAnn’s and get your fabric. I used a flannel from JoAnn’s Plaiditude line. The fabric was on sale for $5.99/yd and I had a coupon for 25% off my entire purchase. For 1 1/2 yes of fabric I spent less than $7.
Trim your fabric so that it is even- AKA follow the plaid lines
On the raw edges, the edges that aren’t “finished” and will fray, pull the horizontal threads to create the frays. I used the point of a seam ripper to help pick out the threads. I only went in about 1/4 of an inch or so, I didn’t want long dramatic frays. Totally up to you though.
Literally took me 45 minutes INCLUDING travel time to my local JoAnn’s and back. So, really, it took me about 15 minutes to trim and pull the frays. The colors of the plaid I used will make mixing and matching a breeze this winter. I can not wait for the weather to cool off enough for me to actually wear/use it. It’s so easy to wear and is comfy and professional.
This would make an AWESOME, inexpensive, and greatly appreciated Christmas gift.
Sometimes, when Christmas rolls around, friends and family have very specific wishes. Sometimes, that makes everyone’s life VERY easy. You know EXACTLY what to get. Other times, it makes life very hard because that item is no longer around.
Grandma asked for a Vera Bradley checkbook cover. I thought that this would be an easy no brainer. My own mother has one. When I worked there, we had bins of them. JUST KIDDING. I went to the outlet, retail store, and a few independent retailers- NOTHING. I refuse to support the bulk buyers on eBay. So what was my alternative- MAKE ONE! I mean, look at who we’re talking about here. In less than an hour I was able to make my own version of the checkbook cover!
Thread/bobbin that match your fabric
1 fabric fat quarter- pattern of your choice
Using the Vera Bradley checkbook cover that I had, I used that as a template and made 2, 7 1/2 x 7 5/8 rectangles. This gave me about 1/4 inch seam allowance all of the way around. I then made 2, 7 5/8 x 3 1/4 rectangles. These would be the flaps that hold the checkbook covers. Again, this allowed for a seam allowance. I cut them all out.
One flap sewn, back side, unsown flap, Vera template
I first did a seam across the top of what would be, the 2 inner flaps. It would be near impossible to do once you sew everything else together, so do NOT skip this step.
With one of the larger rectangles, I sewed the flaps along 3 sides. BOTH were PATTERN side up, this is important.
Now that both of my inner flaps were attached, I place the outer, second large rectangle on top so that the pattern side was facing the pattern side of the inside. I sewed around 3 3/4s of the whole thing. This left me with a hole to turn it right-side out.
I very carefully hand-sewed the last 2 inches to seal it.
Inside with both flaps, turned right-side out
Compared to the Vera Checkbook Cover
What I would do next time: I would get some interfacing to give it a little more heft. It’s fine as it is, and adding cardboard would definitely be way too much, but a little interfacing to give it some more structure would be great! Due to the size of the project, I can’t imagine needing anymore than 1/4 of a yard.